10 plastic bags per box with 100 wipes in each bag. Total wipe count is 1000.

Packaged with 10 bags per box and 50 wipes per bag. Total wipes 500.

Each case contains 20 bags with 25 wipes per bag. Total is 500 wipes per case. SPAC1213WW125

Twin pack in a pop-up box. 125 wipes per side with a total count of 250 wipes.

DuPont aerospace grade wipes, style K802, meet the following requirements: AMS 3819B, Class2, Grade A.Boeing BMS15-5F, Class ACessna CSFS039Douglas DMS 1820EPratt & Whitney GA100-11EUS Air Force T.O. 1-1-8US Navy NAVAIR

ALLProtect products by Swiss manufacturer Landolt are protective, nonwovens for universal use on all common surface types for long-term applications or repeat use. Product Specifications: 39 3/8 inches x 82.02 feet, 269.10 sq/ft per pack 20 lbs per pack Tariff # 5603.14.9010 Features: Easy installation Strong bond Slip-proof Impermeable by dust and small particles Impact absorbent Free of harmful substances Benefits: Padded mechanical protection Flexible material with adhesive backing that sticks without tape Creates safe, non-slip surface that is padded Usable vertically and horizontally No residue* One man job to apply Indoor/outdoor use Reusable * ALLProtect has been shown to leave no residue in most common applications; however, users should always test application of ALLProtect in an inconspicuous area before applying to ensure that no residue is left. Applications: Airframe: leading edge, wings, turbine work Interiors: cabinets, carpets, side panels Windows: no effect on acrylic Avionics: creates non-slip surface for antennae work Detailing Approved Service Centers: Gulfstream Bombardier Embraer Important Instructions of Use to be read before product application.: ALLProtect has been tested at various temperatures and humidities and shown to leave minimal or no residue when applied to common aviation surfaces including painted aluminum panels, wood finishes (including flat and high gloss finishes), acrylic windows and plated control knobs (e.g. light fixtures, seat components, furniture components). However, ALLProtect may leave some residue under certain environmental conditions and/or when applied to certain surfaces and SurfaceLiner therefore cannot guarantee that ALLProtect will be residue-free in all applications. In order to minimize the possibility of residue, you must (1) clean and dry all surfaces immediately prior to applying ALLProtect; (2) test application in an inconspicuous area to ensure performance prior to applying ALLProtect in critical areas; and (3) regularly remove ALLProtect and check for residue when using for extended periods.

ALLProtect products by Swiss manufacturer Landolt are protective, nonwovens for universal use on all common surface types for long-term applications or repeat use. Product Specifications: 39 3/8 inches x 82.02 feet 20 lbs Tariff # 5603.14.9010 Features: Easy installation Strong bond Slip-proof Impact absorbent Free of harmful substances Benefits: Padded mechanical protection Flexible material with adhesive backing that sticks without tape Creates safe, non-slip surface that is padded Usable vertically and horizontally No residue* One man job to apply Indoor/outdoor use Reusable * ALLProtect has been shown to leave no residue in most common applications; however, users should always test application of ALLProtect in an inconspicuous area before applying to ensure that no residue is left. Applications: Airframe: leading edge, wings, turbine work Interiors: cabinets, carpets, side panels Windows: no effect on acrylic Avionics: creates non-slip surface for antennae work Detailing Approved Service Centers: Gulfstream Bombardier Embraer Important Instructions of Use to be read before product application.: ALLProtect has been tested at various temperatures and humidities and shown to leave minimal or no residue when applied to common aviation surfaces including painted aluminum panels, wood finishes (including flat and high gloss finishes), acrylic windows and plated control knobs (e.g. light fixtures, seat components, furniture components). However, ALLProtect may leave some residue under certain environmental conditions and/or when applied to certain surfaces and SurfaceLiner therefore cannot guarantee that ALLProtect will be residue-free in all applications. In order to minimize the possibility of residue, you must (1) clean and dry all surfaces immediately prior to applying ALLProtect; (2) test application in an inconspicuous area to ensure performance prior to applying ALLProtect in critical areas; and (3) regularly remove ALLProtect and check for residue when using for extended periods.

E-4143,100 WIPES/BX